Tag: Sump gasket

Service at Ratrace Motorsport

Mileage 43,784 miles (Last service at 43,417 miles on 03/11/2020)

3,000 mile service and spanner check with synthetic oil.

Ratrace Invoice No. 1853  Order No. 1802 £981.03

Replace sump foam and gasket

Remove seats, unbolt shock tops mounts, remove standard height track day rollbar and fit tall trackday rollbar.

Drill out inertia seat belt box side panels, remove inertia seat belt assembly. Refit panels.

Fit supplied x2 6 point harnesses, refit seats & refit high level brake light.

Replace rear brake pads.

MOT test.

Parts:

x1 Caterham Rover K sump foam baffle

x1 Caterham Rover K sump gasket

x1 Rear brake pad set.

Excellent service again from Rob at Ratrace, highly recommended.

Upgraded sump gasket purchased from Gemzoe Motorsport

Upgraded sump gasket purchased from Gemzoe Motorsport

I’ve got my first batch of updated Rover K-Series wet sump gaskets finished today and some have already been sent out.

They have 3 oil return holes in them that line up to the oil returns in the block.

I’ve seen some of the original gaskets crack in service so these have been made from a slightly different material. I’ve also found out who else my material supplier sells this material to and I’m in very good company.

These are £50 (not vat to add)

If you want them posting out the postage is £7.79 and will come packaged properly so you done end up with a bent and unusable gasket like live received in the past.

Service: Ratrace Motorsport Invoice 1653 dated 23/01/2018. Mileage 41,773

Carry out 3,000 mile service (with anti-cavitation tank).

Replace cambelt and tensioner.

Replace alternator drive belt.

Replace sump foam baffle.

Replace both rubber engine mountings and fit uprated/barced engine mount to nearside.

Supply and fit uprated new design DeDion tube.

Fit 2x new track road ends.

Fit supplied Radtec radiator (and fan).

Grease and adjust both front wheel bearings.

Remove upper anti-roll bar and fit new spec anti-roll bar to lower mounts.

Fit Avon ZZS x4 and balance.

Remove front lower wishbones and replace as spherical bearing carriers out of spec.

Spanner check suspenesion front and rear.

 

Parts:

1x cambelt.

1x alternator drive belt.

1x foam sump baffle.

1x sump gasket.

2x rubber engine mountings.

1x Uprated/barced nearside engine mount.

2x track rod ends.

1x new spec De Dion tube.

2x lower front wishbones.

1x under slung rear anti-roll bar kit.

1x Genuine Rover Crankshaft sprocket.

 

Total: £2,677.78